Aaru Device Report for SAMSUNG HD502HJ 1AJ10102
ATA device
| Model |
SAMSUNG HD502HJ |
|---|
| Firmware revision |
1AJ10102 |
|---|
- ATA-1
- ATA-2
- ATA-3
- ATA/ATAPI-4
- ATA/ATAPI-5
- ATA/ATAPI-6
- ATA/ATAPI-7
- ATA8-ACS
Maximum ATA revision supported:
ATA8-ACS revision 6 - ATA8-AST
- SATA 1.0a
- SATA II Extensions
- SATA 2.5
- SATA 2.6
- Device does not require SET FEATURES to spin up and IDENTIFY DEVICE response is complete.
- At minimum 120 ns. transfer cycle time per word in MDMA, 120 ns. recommended
- At minimum 120 ns. transfer cycle time per word in PIO, without flow control
- At minimum 120 ns. transfer cycle time per word in PIO, with IORDY flow control
- 32 depth of queue maximum
- Device nominal size is 3.5"
- Standby time values are standard
- IORDY is supported and can be disabled
- DMA is supported
- A maximum of 16 sectors can be transferred per interrupt on READ/WRITE MULTIPLE
- Device supports setting a maximum of 16 sectors
- SATA 1.5Gb/s is supported
- SATA 3.0Gb/s is supported
- Receipt of host initiated power management requests is supported
- PHY Event counters are supported
- NCQ is supported
- NCQ priority is supported
- PIO timing mode 2
- PIO0
- PIO1
- UDMA0
- UDMA1
- UDMA2
- UDMA3
- UDMA4
- UDMA5
- UDMA6 (active)
- NOP is supported and enabled
- READ BUFFER is supported and enabled
- WRITE BUFFER is supported and enabled
- Host Protected Area is supported and enabled
- Look-ahead read is supported and enabled
- Write cache is supported and enabled
- Power management is supported and enabled
- Security mode is supported
- 28-bit LBA is supported
- 48-bit LBA is supported and enabled
- FLUSH CACHE is supported and enabled
- FLUSH CACHE EXT is supported and enabled
- Device Configuration Overlay feature set is supported and enabled
- Automatic Acoustic Management is supported and enabled with value 128 (vendor recommends 254
- SET MAX security extension is supported
- SET FEATURES is required before spin-up
- Power-up in standby is supported
- Advanced Power Management is supported
- DOWNLOAD MICROCODE is supported and enabled
- S.M.A.R.T. is supported and enabled
- S.M.A.R.T. Command Transport is supported
- S.M.A.R.T. self-testing is supported and enabled
- S.M.A.R.T. error logging is supported and enabled
- Device has a World Wide Name
- General Purpose Logging is supported and enabled
- Segmented feature in DOWNLOAD MICROCODE is supported and enabled
- READ/WRITE DMA EXT GPL are supported and enabled
- WRITE UNCORRECTABLE is supported and enabled
- DMA Setup auto-activation is supported
- Device-initiated power management is supported
- Software Settings Preservation is supported and enabled
- Security is not enabled
- Supports enhanced security erase
- 76 minutes to complete secure erase
- 76 minutes to complete enhanced secure erase
- Master password revision code: 65534
- SCT Long Sector Address is supported
- SCT Write Same is supported
- SCT Error Recovery Control is supported
- SCT Features Control is supported
- SCT Data Tables are supported
| Logical sector size |
512 bytes |
|---|
| READ LONG sector size |
516 bytes |
|---|
| Cylinders |
16383 max., 16383 current |
|---|
| Heads |
16 max., 16 current |
|---|
| Sectors per track |
63 max., 63 current |
|---|
| Sectors addressable in CHS mode |
16514064 max., 16514064 current |
|---|
| Device size in CHS mode |
8455200768 bytes, 8455 Mb, 8063.51 MiB |
|---|
| Sectors addressable in sectors in 28-bit LBA mode |
268435455 |
|---|
| Device size in 28-bit LBA mode |
137438952960 bytes, 137 Gb, 128.00 GiB |
|---|
| Sectors addressable in sectors in 48-bit LBA mode |
976773168 |
|---|
| Device size in 48-bit LBA mode |
500107862016 bytes, 500 Gb, 465.76 GiB |
|---|
- Device rotates at 7200 rpm
- Device supports READ SECTOR(S) command in CHS mode
- Device supports READ SECTOR(S) RETRY command in CHS mode
- Device supports READ DMA command in CHS mode
- Device supports READ DMA RETRY command in CHS mode
- Device supports READ SECTOR(S) command in 28-bit LBA mode
- Device supports READ SECTOR(S) RETRY command in 28-bit LBA mode
- Device supports READ DMA command in 28-bit LBA mode
- Device supports READ DMA RETRY command in 28-bit LBA mode
- Device supports READ SECTOR(S) command in 48-bit LBA mode
- Device supports READ DMA command in 48-bit LBA mode
- Device supports SEEK command in CHS mode
- Device supports SEEK command in 28-bit LBA mode